Force-5 4G, 3-Way Dome Antenna | 980000

This award winning FORCE-5 do-it-yourself amplifier kit is a 5 band system with 72dB gain is suited for large enterprise type buildings. This system comes with 3 indoor dome antennas that can cover a combined area of 25,000 sq ft. This 5 band system is scalable to multiple floors or multiple sections in one building or adjoining buildings.

Key Features

  • The amplifier is highly linear, providing even coverage inside the building
  • Highest data speed currently in the market
  • Dual Embedded CPU for smarter technology
  • Easily scalable to multiple levels and multiple sections within building by adding splitters and inline amplifiers
  • 5 band operates on all frequencies used by phone companies for communication in North America
  • Uplink: 698-716 / 776 – 787 / 824-849 / 1850-1910 /1710-1755 G Block Included;
  • Downlink : 728-746 / 746 – 757 / 869-894 / 1930-1990 / 2110-2155 G Block Included
  • Automatic shutdown circuit protects the amplifier from unexpected surges like lightning and other unexpected spikes
  • Independent manual control for oscillation detection and control
  • Communicates directly to and from the cell tower

What’s Included

  • 72 dB Cel/ 72dB PCS amplifier
  • External omnidirectional antenna to communicate with the cell tower or directional Yagi antenna can be chosen at checkout!
  • Three way splitter to divide the signal to serve three indoor antenna
  • 4 x 75 ft low loss cable
  • 3 indoor dome antennas to broadcast indoor signal

force-5-3-way

Instruction Manual

Networks Supported

  • AT&T 2G/3G/4G voice+ data
  • Verizon 2G/3G/4G HSPA & LTE voice+ data
  • Sprint 2G/3G/4G voice+ data
  • US Cellular 2G/3G/4G voice+ data
  • Alltel 2G/3G/4G voice+ data
  • T-Mobile 2G/3G/4G HSPS & LTE voice+ data
  • Major Canadian Carriers 2G/3G/4G voice+ data
  • All other carriers using 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz

Technical Specification

 

Frequency Uplink: 1850-1910/824-849/698-716/776-787/1710-1755 Downlink: 1930-1990/869-894/728-746/746-757/2110-2155
Average Gain 72dB
Maximum Gain 85dB
VSWR ≤2:0
Standard Supported CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cell phone networks
AC Power Transformer Input AC110V, 60Hz; Output: DC19V
Maximum RF Output Power 27 dBm with High Linearity
Noise Figure 7dB
Cable LMR400 or CM400 recommended
RF connectors N Female connectors on both ends
Power Consumption <65W
Dimensions 14.5” x 11” x 3.5”
Weight 19.5 lbs
Input Impedance 50 ohm
VSWR ≤2:0
DC Power 19V

 
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.