Fusion-5 72 dB, 4G| 980554

This 5 band booster system works for Verizon, T-Mobile, and AT&T networks that delivers 2G, 3G, and 4G LTE/AWS. If 4G data speed is your priority, this kit will deliver the fastest speed you can possibly access. The effective coverage area system is 20,000 sq ft coverage inside metal, steel, concrete, or any other type of building.

Product Overview

  • Delivers boosting for all networks with 2G, 3G, and 4G data and voice signal
  • Automatic shut down protects the system from unexpected voltage spikes or signal spikes that can effect the cell towers
  • Approved by the FCC for safe use on any network in North America and Canada
  • 10 or more simultaneous users can operate at the same time
  • No need for user registration like micro-cells or Femto-cell requires
  • Adjustable gain control, lets you fine tune the amplifier for your specific carrier
  • Oscillation detection identifies swings in signal oscillation and eliminates unwanted noise

Instruction Manual

What’s Included

  • Wide band omnidirectional fiber glass antenna
  • A ceiling mount dome antenna
  • 3 x 50 ft LMR 400 low loss cable
  • Note: This system can be split into 2-way, 3-way or 4-ways. The options at the checkout will allow you to customize the number of antennas and splitters
    Force5-1-way-yagi

Installation Instruction

  • Find a location outside the building, preferably on the roof or balcony . Mount the outside omnidirectional antenna with the mounting screws provided
  • Connect the cable provided to the amplifier that is marked “OUTSIDE” and connect the other end to the ceiling mount dome antenna
  • Mount the dome antenna on the ceiling of the weak signal area, centrally so the antenna can broadcast signal in a 360° pattern
  • Connect the cable from the outside antenna to the amplifier end that says “INSIDE”. Connect the power supply provided to the amplifier and turn on the amplifier to enjoy strong signal inside your building!
  • Instruction Manual

    Product Specification

    Frequency Uplink: 698-716 / 776 – 787 / 824-849 / 1850-1910 / 1710-1755; Downlink: 728-746 / 746 – 757 / 869-894 / 1930-1990 / 2110-2155
    Input Impedance 50 ohm
    Average Gain 65dB
    Maximum Gain 70dB
    VSWR <2:0
    Standard Supported CDMA / WCDMA,GSM,EDGE,TDMA AMP etc.
    AC Power Transformer Input AC110V,60Hz; Output DC 12-6V
    DC Power 9V
    Maximum RF Output Power 3 Watts EIRP
    Noise Figure 6dB
    Cable LMR400 or CM400 recommended
    RF connectors N Female connectors on both ends
    Power Consumption <25W
    Dimensions 10.75″ x 9″ 2.25″
    Weight 10.5 lbs

    •  
    This is a CONSUMER device.
    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
    WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.