DB Pro 3G With 2-Way Antenna – 841266

This kit is for home or office that requires split antenna to cover two separate areas. The DBPro is a 65 db gain amplifier system with a sensitive external Yagi antenna to capture the weakest signal from the cell phone tower. The 65 dB amplifier can boost your signal powerful enough to split the signal between two levels and still get 5 bars on each level.

Key Features

  • Dual band system works with all cell phone carriers including T-Mobile, Verizon, AT&T, Sprint PCS, Alltel, Cricket, Metro PCS, US cellular, Tracfone, Boost Mobile, Virgin Mobile except for Nextel
  • Creates a wireless ambiance for complete wireless experience
  • Boosts data as well as voice for wireless card users for the internet
  • The gain control feature is now included in this model, which lets you adjust the level of signal boost you require
  • Uses RG6 cable, which is the satellite cable pre-wired in most homes
  • Easy installation, with clearly labeled parts
  • No internet connection or contract required
  • Automatic shut down during overload or feedback
  • FCC approved amplifiers and antennas require no setup or software installation. Just power up and see your signal raise
  • 2 year manufactures warranty
  • 30 day risk free trial guaranteed

    • Kit Includes

  • Wilson 801262 Dual Band amplifier with gain control to adjust the level of boost you want
  • 75 ohm External Yagi antenna – 304475
  • Internal panel antenna – 301155
  • Splitter – 859959
  • 1 x 50ft RG6 low loss coaxial cable – 950650
  • 1 x 30ft RG6 low loss coaxial cable – 950630
  • 1 x 20ft RG6 low loss coaxial cable – 950620
  • Installation hardware

    • DP-pro-second-floor-cell-phone-booster1

    Product Specification

    Manual
    		 Installation and Instruction
    Part Number
    		801262
    Frequency
    		 824-894 MHz / 1850-1990 MHz
    Gain
    		 65 dB / 65 dB
    Max Output Power
    		2.5 watts
    Max RF (up/down)
    		34 dBm / 15.7 dBm
    Noise Figure
    		 3.5 dB nominal
    Flatness
    		 ±5 dB
    Isolation
    		 > 90 dB
    Power Requirements
    		120-240 V AC, 50-60 Hz, 8 W max
    Connectors
    		 F-Female
    Dimensions
    		 6.2 x 4.2 x 1.5 (inch)
    15.7 x 10.7 x 3.8 (cm)
    Weight
    		 0.64 lbs / 0.29 kg