Force-5 4G, 1-way Antenna | 980040

This award winning Force-5 system is a five band system that amplifies signal for all 5 bands 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz, including AWS and LTE. This is one of the very first systems capable of boosting signal for 3G, 4G voice and data. This repeater system can cover up to 20,000 Sq feet inside commercial buildings with capacity to support 50+ users simultaneously.

Overview

  • Works for 2G, 3G, and 4G on all carriers in North America
  • 100+ simultaneous users can make and receive calls without overloading the system or the cell tower
  • Works with all three major carriers AT&T, Verizon, and T-Mobile
  • Full features amplifier has adjustable gain control for fine tuning if needed for a specific carrier
  • Metal casing with intelligent temperature control keeps this amplifier humming under high stress
  • 3 year manufacturing warranty speaks for the confidence in its build

What’s Included

  • Force-5, 5 band amplifier system
  • Yagi antenna, full band (698 – 2700 MHz) or omnidirectional antenna can be chosen at checkout!
  • Ceiling mount dome antenna
  • 2 x 75 ft low loss cable

Installation

Installation is simple and the kit comes with a clear instruction manual. Mounting the Yagi antenna is similar to installing a TV antenna that connects to a cable. The cable is run into the building to the amplifier and installation is completed by mounting the indoor antenna in the ceiling.
dual-force-1-way
Instruction Manual

Networks Supported

  • AT&T 2G/3G/4G voice+ data
  • Verizon 2G/3G/4G HSPA & LTE voice+ data
  • Sprint 2G/3G/4G voice+ data
  • US Cellular 2G/3G/4G voice+ data
  • Alltel 2G/3G/4G voice+ data
  • T-Mobile 2G/3G/4G HSPS & LTE voice+ data
  • Major Canadian Carriers 2G/3G/4G voice+ data
  • All other carriers using 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz

Technical Specification

 

Frequency Uplink: 1850-1910/824-849/698-716/776-787/1710-1755 Downlink: 1930-1990/869-894/728-746/746-757/2110-2155
Average Gain 72dB
Maximum Gain 85dB
VSWR ≤2:0
Standard Supported CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cell phone networks
AC Power Transformer Input AC110V, 60Hz; Output: DC19V
Maximum RF Output Power 27 dBm with High Linearity
Noise Figure 7dB
Cable LMR400 or CM400 recommended
RF connectors N Female connectors on both ends
Power Consumption <65W
Dimensions 14.5” x 11” x 3.5”
Weight 19.5 lbs
Input Impedance 50 ohm
VSWR ≤2:0
DC Power 19V

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.