Wilson 3G Booster System for 15,000 Sq Ft – 94165

This is a 65 dB repeater system with two separate Yagi antennas for 850 Mhz CEL band and 1900 Mhz PCS band network coverage. A full 65dB amplifier for each individual frequency (1900mHz and 850Mhz) amplifies even a weak signal (1-2 bar) over a large area due to individual amplification and efficient capture of that weak signal using two separate Yagi antenna.

Installed in large house, office, factories, fire stations with multiple rooms and users operating on several networks, except for Nextel .

Key Features

  • 65 dB gain with peak amplification done FROM and TO the cell tower directly
  • 850 Mhz high gain Yagi antenna captures all the CEL bandwidth
  • 1900 Mhz high Yagi antenna captures PCS bandwidth
  • 25 users plus can use simultaneously
  • Improves internet data along with voice
  • Kit Includes

  • Wilson 801165 800MHz, 65dB Amplifier
  • Wilson 801365 1900MHz, 65dB Amplifier
  • Wilson 301129 800MHz Yagi Antenna
  • Wilson 301124 1900MHz Yagi Antenna
  • Wilson 301135 Wall mount panel antenna
  • Wilson 859922 Diplexer
  • 2 x 2-ft. LMR Low-Loss Coaxial Cables
  • 2 x 75-ft. LMR Low-Loss Coaxial Cable
  • 50-ft. LMR Low-Loss Coaxial Cable
  • Installation Diagram

    Installation Diagram


    Installation Manual

    Technical Specification

    Part Number
    801165
    Frequency
    824-835 MHz, 869-880 MHz
    Gain
    65 dB
    Max Output
    3 watts
    Max RF
    + 30 dBm / + 30 dBm
    Noise Figure
    3-4 dB typical
    Flatness
    ± 2.5 dB
    Isolation
    > 90 dB
    Power Requirements
    Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A
    Connectors
    N-Female 50 ohms
    Dimensions
    5.6 x 3.6 x 1.7 (inch) / 14.2 x 9.1 x 4.4 (cm)
    Weight
    1.5 lbs / 0.7 kg

    Leave a Reply