AT&T 4G Add-On For Existing 3G Booster System

This is a single band 700 Mhz booster kit that can be easily added to a 3G booster system. This 32 dB gain system works for At&T 4G LTE to increase the speed on the 4G data cards. This add on can be added to an existing 3G booster system such as this SOHO booster system. If you get 4G signal in your location and want to increase speed for 4G internet, this is the kit!

Kit Includes

  • 32 dB gain amplifier that has independent control for uplink/downlink allows you to dictate the data speed
  • 2 x wide band diplexers , used for splitting and combining the signal
  • 4 x 2 feet jumper cables

    • Installation Diagram

    Installation

    Specification

    Frequency Uplink: 728-746Mhz; Downlink : 698-716Mhz
    Input Impedance 50 ohm
    Average Gain 32dB
    Maximum Gain 35dB
    VSWR <2:1
    Standard Supported LTE
    AC Power Transformer Input AC110V,60Hz; Output DC6V
    DC Power 12V
    Maximum RF Output Power 3 Watts EIRP
    Noise Figure 5dB
    RF connectors FME Male connectors on both ends
    Power Consumption <9W
    Dimensions 6" x 4" x 2"
    Weight 1 lb 13oz
    Cable CM240 or RG58 recommended