Force-5 4G, 2-Way Antenna | 980555

2 x Indoor antenna that can boost voice & data signal for an area of 25,000 sq ft and above on all carriers.

Add to Compare

Product Description

This award winning Force-5 amplifier system has a 72dB gain amplifier at its heart and fitted with 2 indoor antennas suitable for locations that have an office in front and warehouse in the back. We recommend this system for large multilevel or split buildings to eliminate dead zones and expand cell phone service for all 5 bands 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz, including AWS and LTE.

Key Features

  • First to market with coverage area up to 25,000 Sq ft.
  • 100+ simultaneous users can make and receive calls without overloading the system or the cell tower
  • No software or pairing of individual phones required, boost signal on all carriers and all phones
  • Works with 2G, 3G, 4G, AWS, and LTE networks
  • Verizon, AT&T, T-Mobile, Bell South, Rogers
  • Individual band adjustment dials and up link/down link oscillation detection
  • Works for Voice and Hi-Speed data connection
  • Metal casing with intelligent temperature control keeps this amplifier humming under high stress
  • 3 year manufacturing warranty speaks for the confidence in its build
  • What’s Included

  • FORCE-5 72 dB gain amplifier
  • Wide band Omnidirectional antenna or directional Yagi antenna can be chosen at checkout!
  • 2 way splitter
  • 2 dome antenna
  • 2 x 50 ft & 30 ft cable and necessary hardware
  • Dualforce-2-way


    AllTell2G Voice3G Data4G LTE4G HSPA+
    AT & T2G Voice3G Data3G Data4G HSPA+4G LTE
    Sprint PCS2G Voice3G Data4G HSPA+4G LTE
    T-mobile2G Voice3G Data4G HSPA+4G LTE
    US Cellular2G Voice3G Data4G HSPA+4G LTE
    Verizon2G Voice3G Data4G HSPA+4G LTE

    Technical Specification

    Frequency Uplink: 1850-1910/824-849/698-716/776-787/1710-1755 Downlink: 1930-1990/869-894/728-746/746-757/2110-2155
    Average Gain 72dB
    Maximum Gain 85dB
    VSWR ≤2:0
    Standard Supported CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cell phone networks
    AC Power Transformer Input AC110V, 60Hz; Output: DC19V
    Maximum RF Output Power 27 dBm with High Linearity
    Noise Figure 7dB
    Cable LMR400 or CM400 recommended
    RF connectors N Female connectors on both ends
    Power Consumption <65W
    Dimensions 14.5” x 11” x 3.5”
    Weight 19.5 lbs
    Input Impedance 50 ohm
    VSWR ≤2:0
    DC Power 19V
    This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.


    1. :

      We had this unit installed in a new construction that we completed for a client of ours and since our factory type building was meta roofed , we had no signal what so ever. This booster kicked in our signal from 0 to 5 bars instantly and covered an area the size of football stadium. We had custom cut our cable to our requirement and installed with no assistance. Thanks you guys!

    2. :

      This unit was purchased after consulting with the tech support and was recommended for our midtown facility that was having poor reception due to metal roof. The installation was pretty much like installing a television antenna outside and plug-n-play . We had trouble fine tuning the frequencies for different carriers at first and then with some assistance from technical support, it worked perfect. We have looked at other solutions like a distributed wifi solution at first and changed to this for how cost effective it was. If you want a simple no nonsense solution, then these booster systems are the way to go.

    Add a review