Weboost Connect 4G | 470103

  • Formerly Wilson DB Pro Quint
  • This Weboost connect 4G unit is an effective solution for solving poor 3g and 4g signal inside homes upto 5,000 sq ft coverage area. Increase signal on both 3G voice & 4G data on all major carriers
  • $499

    In Stock. Ships in 24 to 48 hours.


    Call us for a FREE product recommendation 502-715-7506

    Ships today

    if order is placed before 3PM EST

    Secure Payment Options

    Cell Phone Signal Booster Store, We Solve Poor Cell Phone Signal - Cellphoneboosterstore.com

    Product Description

    This Weboost connect 4G unit is an effective solution for solving poor 3G and 4G signal inside homes up to 5,000 sq ft coverage area. This is the first 5 band system that brings affordable 4G signal inside buildings. This kit boosts signal on 4G LTE and AWS networks including Verizon, AT&T, T-Mobile, and others.

    Key Features

  • Boosts 2G, 3G voice, and 4G data signal on all networks
  • Can browse Internet at 4G LTE and AWS speed
  • Eliminates slow data connection and cover the entire home to eliminate any dead zones
  • Easy installation and software set up or installation required, plug it and play it!
  • SMART3 technology prevents any over load to the cell site and loved by cell networks
  • What’s Included

  • 65 dB gain Weboost amplifier- 460003
  • External directional Yagi antenna – 3114475
  • Internal wall panel antenna or dome antenna – 311155
  • 2 x 30ft RG6 ultra low loss coaxial cable – 950630
  • Installation hardware such as U-bolt and clamps (mounting pole, not included)
  • Compatibility

    AllTell2G Voice3G Data4G HSPA+4G LTE
    AT & T2G Voice3G Data3G Data4G HSPA+4G LTE
    Sprint PCS2G Voice3G Data4G HSPA+4G LTE
    T-mobile2G Voice3G Data4G HSPA+4G LTE
    US Cellular2G Voice3G Data4G HSPA+4G LTE
    Verizon2G Voice3G Data4G HSPA+4G LTE

    How it works

    The main reason for poor or no signal inside buildings is because of the building itself. Especially a metal or brick building can limit cell phone signal from getting IN and OUT of the building, causing dead zones and dropped calls. Our booster systems capture cell phone signal outside the building using an external antenna, sends that captured signal via cable into the building. Once the signal is inside the building, the amplifier boosts the signal into a stronger signal and broadcast that amplified signal through out the building for improved coverage. ID-DT


    Product Number
    BAND 17
    700 MHz
    BAND 13
    700 MHz
    BAND 5
    850 MHz
    BAND 4
    1700/2100 MHz
    BAND 25
    1900 MHz
    Max Gain
    65 dB
    Power Requirements
    110-240 V AC, 50-60 Hz, 8 W
    6.5 x 4.25 x 1.75 in / 16.5 x 10.7 x 4.4 cm
    .41 lbs / 0.20 kg (Signal Booster Only)
    This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.


    There are no reviews yet.

    Be the first to review “Weboost Connect 4G”