Dual Force 72 dB 3G, 2-Way Dome Antenna | 941266

This Dual Force amplifier is the most powerful full gain available in the market for 3G networks. This amplifier can support 75+ simultaneous users in large organizations that experience a high volume of cellular traffic. This kit has 72 dB PCS/72 dB cellular gain to support standards like CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, and LTE networks.

Key Features

  • Highly linear system is recommended when you have multiple indoor antennas or anticipate to add more antennas in the future
  • Automatic shutdown keeps the systems turned off if an overload occurs and prevents it from effecting the cell tower
  • Each band is individually configurable to give you, the user, the complete control
  • Boosts signal for both voice and data
  • Handles high user requests simultaneously, which makes it ideal for factories, offices, and commercial buildings

What’s Included

  • Dual Force 72dB dual band amplifier
  • Highly sensitive outdoor yagi antenna
  • Omnidirectional dome antenna for indoor broadcast
  • 75 ft and 2 x 50 ft low loss LMR400 coaxial cable
  • Necessary hardware for antenna installation, (pole for outdoor mount not provided).

    How it works

    The external omnidirectional antenna communicates with the cell phone tower in receiving the cell phone voice and data signal. That signal gets transmitted to the amplifier inside the building. Once that signal is amplified, the signal can be split into 2,3, or 4 way using a signal splitter and sent to corresponding number of indoor antennas to re-broadcast that signal.
    Dualforce-2-way

    Instruction Manual
    Multilevel-building

    Networks Supported

  • AT&T 2G/3G/4G voice+ data
  • Verizon 2G/3G/4G HSPA & LTE voice+ data
  • Sprint 2G/3G/4G voice+ data
  • US Cellular 2G/3G/4G voice+ data
  • Alltel 2G/3G/4G voice+ data
  • T-Mobile 2G/3G/4G HSPS & LTE voice+ data
  • Major Canadian Carriers 2G/3G/4G voice+ data
  • All other carriers using 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz

  • Specification

     

    Frequency Uplink: 824-849/1850-1910 Mhz; Downlink : 869-894/1930-1990Mhz
    Average Gain 80dB Cellullar / 80dB PCS
    Maximum Gain 80dB Cellular/80dB PCS
    VSWR ≤2:0
    Standard Supported CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cell phone networks
    AC Power Transformer AC 110V, 60Hz
    Maximum RF Output Power 27 dBm
    Noise Figure 5dB
    Cable SC-400
    RF connectors N Female connectors on both ends
    Power Consumption <40W
    Dimensions 10.5” x 7.5” x 2”
    Weight 8.05 lb
    VSWR <2:1

    This is a CONSUMER device.
    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
    WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.