AG Pro Wilson System With Dual Band Yagi – 801280

The 75 dB maximum gain booster system is the first booster kit to feature the highest gain amplifier in the market. This level of gain in amplifier was never attempted before, Wilson Electronics recently figured out a way to pack such high gain system that also comply with FCC regulation. This system can cover up to 15,000 Sq ft inside area.

Key Features

  • Dual band booster system works with all carriers, both voice and data (3G, 4G)
  • First ever 75dB high gain amplifier, with adjustable gain
  • Two separate Yagi antenna, one for each frequency (850 Mhz and 1900 Mhz)
  • Signal broadcast is farther and better penetration through walls and floors
  • High sensitivity yagi antenna, works great for areas with less then 2 bars signal strength
  • Better data connection for better internet connection
  • Multiple carries and multiple devices (phone , laptop) support

    • How it Works

    The complete system comprises of three major components that simply screws and install with no software necessary.

  • External Yagi antenna
  • Amplifier
  • Internal Broadcast antenna

    • As illustrated in the diagram below, the external antenna is mounted outside the building as shown. The two 75 feet cable (all included in the kit) connects the external antenna into a signal combiner and connects into the amplifier using a 2 feet jumper cable. The amplifier is the only component that requires an AC outlet to power up and the rest of the components operate independently.

    75db-booster-system-installtion-diagram

    Installation Manual

    Kit Includes

  • 75dB Amplifier with adjustable gain
  • Wilson 301129 800MHz Yagi Antenna
  • Wilson 301124 1900MHz Yagi Antenna
  • Wilson 301135 Wall mount panel antenna
  • Wilson 859922 Signal Combiner with FME Connectors
  • 2 x 75 ft. LMR Low-Loss Coaxial Cable
  • 1 x 50 ft. LMR Low-Loss Coaxial Cable
  • 2 ft. LMR jumper cable

    • Technical Specification

    Part Number
    		801106/801306
    Frequency
    		 824-835 MHz, 869-880 MHz
    Gain
    		 75 dB
    Max Output
    		3 watts
    Max RF
    		 + 30 dBm / + 30 dBm
    Noise Figure
    		 3-4 dB typical
    Flatness
    		 ± 2.5 dB
    Isolation
    		 > 90 dB
    Power Requirements
    		Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A
    Connectors
    		 N-Female 50 ohms
    Dimensions
    		 4.5 x 3.5 x 1.25 (inch) / 14.2 x 9.1 x 4.4 (cm)
    Weight
    		 1.5 lbs / 0.7 kg

    Leave a Reply