Fusion-5 72 dB 4G, 2-Way | 980555

This 5 band booster system works for Verizon, T-Mobile, and AT&T networks that delivers 2G, 3G and 4G LTE/AWS. If 4G data speed is your priority, this kit will deliver the fastest speed you can possibly access. The effective coverage area system is 20,000 sq ft coverage inside metal, steel, concrete, or any other type of building.

Product Overview

• Delivers boosting for all networks with 2G, 3G, and 4G data and voice signal
• Automatic shut down protects the system from unexpected voltage spikes or signal spikes that can effect the cell towers
• Approved by the FCC for safe use on any network in North America and Canada
• 10 or more simultaneous users can operate at the same time
• No need for user registration like Micro-cells or Femto-cell requires
• Adjustable gain control, lets you fine tune the amplifier for your specific carrier
• Oscillation detection identifies swings in signal oscillation and eliminates unwanted noise

Instruction Manual

Networks Supported

• AT&T 2G/3G/4G voice+ data
• Verizon 2G/3G/4G HSPA & LTE voice+ data
• Sprint 2G/3G/4G voice+ data
• US Cellular 2G/3G/4G voice+ data
• Alltel 2G/3G/4G voice+ data
• T-Mobile 2G/3G/4G HSPS & LTE voice+ data
• Major Canadian carriers 2G/3G/4G voice+ data
• All other carriers using 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz,1710-1755/2110-2155 MHz

What’s Included

• Wide band omnidirectional fiber glass antenna
• 2 ceiling mount dome antenna
• Two-way splitter to divide the signal for two sections
• 2 x 75ft, 30ft LMR 400 low loss cable
• Note: This system can be split up to 4-ways for 4 floors. The options at the checkout will allow you to customize the number of antennas and splitters
  

  Installation Instruction

• Find a location outside the building, preferably on the roof or balcony . Mount the outside omnidirectional antenna with the mounting screws provided
• Connect the cable provided to the amplifier that is marked “OUTSIDE” and connect the other end to the ceiling mount dome antenna
• Mount the dome antenna on the ceiling of the weak signal area, centrally so the antenna can broadcast signal in a 360° pattern
• Connect the cable from the outside antenna to the amplifier end that says “INSIDE”. Connect the power supply provided to the amplifier and turn on the amplifier to enjoy strong signal inside your building!
• Instruction Manual
  

  Product Specification

  Frequency Uplink: 698-716 / 776 – 787 / 824-849 / 1850-1910 / 1710-1755; Downlink: 728-746 / 746 – 757 / 869-894 / 1930-1990 / 2110-2155 Input Impedance 50 ohm Average Gain 65dB Maximum Gain 70dB VSWR <2:0 Standard Supported CDMA / WCDMA,GSM,EDGE,TDMA AMP etc. AC Power Transformer Input AC110V,60Hz; Output DC 12-6V DC Power 9V Maximum RF Output Power 3 Watts EIRP Noise Figure 6dB Cable LMR400 or CM400 recommended RF connectors N Female connectors on both ends Power Consumption <25W Dimensions 10.75″ x 9″ 2.25″ Weight 10.5 lbs

Commercial Kits

click on image
Model#	461104	90072	980040	980555	98000
Area	10,000 Sq Ft	50,000 Sq Ft	80,000 Sq Ft	80,000 Sq Ft	120,000 Sq ft
Price	$899	$1499	$2399	$2449	$2699
Carrier	All U.S. Carriers	All U.S. Carriers	All U.S.Carriers	All U.S. Carriers	All U.S.Carriers
3G Speed
4G Speed
Min Bars Required	1 bar	1 bar	1 bar	1 bar	1 bar
Outside Antenna Type	Directional Antenna	Omni-Directional Antenna	Directional Antenna	Directional Antenna	Omni-Directional Antenna
Inside Antenna Type	Dome Antenna	Dome Antenna	Dome Antenna	2 Dome Antenna	3 DomeAntenna