ZBoost 3G With Yagi – ZB545

This zBoost ZB545 is an upgraded version of its best selling predecessor zBoost510. This is another do-it-yourself kit you can install very easily inside a small residential or office building to boost 3G voice and data. This dual band amplifier kit works on 850Mhz and 1900Mhz networks of AT&T, T-Mobile, Verizon, and US Cellular networks.

Quick Overview

  • A perfect solution for small apartment buildings and single family homes
  • A low profile outdoor antenna is suited for apartment buildings that do not have roof access
  • The indoor antenna is mounted on the amplifier unit that needs no separate installation
  • Amplifies all the frequency in North America and works with any phone
  • Increase data usage and improve Internet browsing on smart phones

What’s Included

  • ZB545 amplifier base unit
  • 50′ coax cable
  • External omnidirectional antenna
  • Power supply and necessary mounting hardware

ZB545-illustration

Networks Supported

  • AT&T 2G/3G/4G HSPA+ (shows as 4G on your phone)
  • Verizon 2G/3G
  • Sprint 2G/3G
  • US Cellular 2G/3G
  • Alltel 2G/3G
  • T-Mobile 2G/3G
  • Major Canadian Carriers 2G/3G
  • All other carriers using 800 MHz and 1900 MHz
  • Will not boost 4G LTE for any carrier

Specification

 

Product Specifications: SOHO ZB545
PCS
Frequency 1850 to 1990 MHz
System Gain 64 dB
PCS Bands Supported A, D, B, E, F, C
Networks CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
Cellular
Frequency 824 to 894 MHz
System Gain 62 dB
Cellular Bands Supported A, B, A’, B’
Networks CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
General
 Power Consumption 3W standby; 7W max signal – 2.0A Max
 Wall Supply Input; Voltage 100-240VAC 50-60 Hz; 5.0VDC
 System Certifications FCC Parts 15 & 20, Industry Canada
 Base Unit Size and Weight 5” x 7” x 1.25” – 9 oz.
 Operating Conditions Indoor Use Only (40°- 105° F)
 Coverage (Open Areas) Up to 2,500 sq. ft.

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approv3ed antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.