AG Pro Dual Band Wilson System With Yagi – 801265

The 70 dB maximum gain booster system is the first booster kit to feature the highest gain amplifier in the market. This level of gain in amplifier was never attempted before, Wilson Electronics recently figured out a way to pack such high gain system that also comply with FCC regulation. This system can cover up to 10,000 Sq ft inside area.

Key Features

  • Dual band booster system works with all carriers, both voice and data (3G, 4G)
  • First ever 70dB high gain amplifier, with adjustable gain
  • 2-in-1, Yagi antenna works for both 850 Mhz and 1900 Mhz
  • Signal broadcast is farther and better penetration through walls and floors
  • High sensitivity yagi antenna, works great for areas with less then 2 bars signal strength
  • Better data connection for better internet connection
  • Multiple carries and multiple devices (phone , laptop) support
  • FCC approved amplifiers and antennas require no setup or software installation. Just power up and see your signal raise

    • How it Works

    The complete system comprises of three major components that simply screws and install with no software necessary.

  • External Yagi antenna
  • Amplifier
  • Internal Broadcast antenna

    • As illustrated in the diagram below, the external antenna is mounted outside the building as shown. The 75 feet cable (included in the kit) connects the external antenna and the amplifier. The amplifier is the only component that requires an AC outlet to power up and the rest of the components operate independently.

    Kit Includes

  • 70 dB Amplifier with adjustable gain
  • Wilson 304411 dual band Yagi Antenna
  • Wilson 301135 Wall mount panel antenna
  • 1 x 75 ft. LMR Low-Loss Coaxial Cable
  • 1 x 50 ft. LMR Low-Loss Coaxial Cable

    • ag-pro-install

    Installation Manual

    Technical Specification

    Part Number
    		801106/801306
    Frequency
    		 824-835 MHz, 869-880 MHz
    Gain
    		 75 dB
    Max Output
    		3 watts
    Max RF
    		 + 30 dBm / + 30 dBm
    Noise Figure
    		 3-4 dB typical
    Flatness
    		 ± 2.5 dB
    Isolation
    		 > 90 dB
    Power Requirements
    		Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A
    Connectors
    		 N-Female 50 ohms
    Dimensions
    		 4.5 x 3.5 x 1.25 (inch) / 14.2 x 9.1 x 4.4 (cm)
    Weight
    		 1.5 lbs / 0.7 kg

    Leave a Reply