Verizon 4G Add-On For Existing 3G Booster System

This is a single band 700 Mhz booster kit that can be easily added to a 3G booster system. This 32 dB gain system works for Verizon 4G LTE to increase the speed on the 4G data cards. This add on can be added to an existing 3G booster system such as this SOHO booster system. If you get 4G signal in your location and want to increase speed for 4G internet, this is the kit!

Kit Includes

  • 32 dB gain amplifier that has independent control for uplink/downlink allows you to dictate the data speed
  • 2 x wide band diplexers , used for splitting and combining the signal
  • 4 x 2 feet jumper cables

Installation Diagram

Installation

Specification

 

Frequency Uplink: 776-787 Mhz; Downlink : 746-757 Mhz
Average Gain 32dB
Maximum Gain 37dB
VSWR ≤2:0
Standard Supported Verizon LTE
AC Power Transformer Input AC110V,60Hz; Output DC 5-15V
Maximum RF Output Power 3 Watts EIRP
Noise Figure 5dB
Cable CM240 or RG58 recommended
RF connectors FME Male connectors on both ends
Power Consumption <10W
Dimensions 6” x 4” x 2”
Weight 1 lb 13 oz
VSWR <2:1
Input Impedance 50 ohm

 

One Response on “Verizon 4G Add-On For Existing 3G Booster System”

Leave a Reply